Welcome, Guest ( Login )

Equipment


1008: 3 in 1 Ortho Electric Welder

Ortho Electric Welder
Three in One:
Electric Welder, Solder, and Annealer

1028: PUK D5 Pulse Welder Unit

PUK D5 Micro Pulse Welding System
Developed for Daily Use in Orthodontic and Dental Laboratories
The PUK Welding System is Delivered with the Following Accessories and Contains All Necessary Documentation and Instructions:
  • The PUK welding system with the selected welding microscope including the welding handpiece
  • 3 different contact clamps,retention welding adapter (set of 1.2, 1.3, 1.5 and 2 mm including 10 retention pins), gas hose, cleaning brush and connecting cable
  • 1 set special electrodes
  • 100-600 USF Argon gas flow regulator by Lampert
  • Footswitch
  • A small welding course with brief instructions, some stainless steel sheets, and welding wire.
  • Manual
  • DVD with videos and information in 5 languages

1005HK: Waxing Iron & Station

Waxing Iron & Station

Electronic Waxer - Thin pencil style iron, variable temperature control box, ceramic heater.  Dial temperature up or down depending on the type of wax or the amount of wax needed.  Spoon Shaped Tip allows for transfering melted wax to your work location.  Extra tipped included for electro soldering when needed.

 

1016/MT15: MT15 Orthodontic Trimmer

HP Orthodontic Model Trimmer (Basic)
Twelve (12") Disk, 1/2 HP Motor with Gage
Other Models Available, Call Customer Service for More Selections.

1016/MT12   12' 1/2 HP Model Trimmer

Model Trimmer - Basic
12" Wheel, 1/2 HP Motor
Ray Foster
 
 

1016/MT10: 10' 1/3 HP Model Trimmer

Model Trimmer - Basic
Ten (10") Wheel - 1/3 HP Motor
Often Purchased for in Office Use

1003: 4 1/4 Variable Speed Vibrator

4 1/4 Top Variable Speed Dental Vibrator
Removable Rubber Top
Ray Foster Model
 

SPECIAL ORDER ITEM Will SHIP DIRECTLY FROM MANUFACTURER

 

1004: Heavy Duty Vibrator

Heavy Duty Dental Vibrator 
 
6 1/2"  Diameter Table, Three (3) Speed Switch - Removable Top
Ray Foster Model
SPECIAL ORDER - WILL DROP SHIP DIRECTLY FROM MANUFACTURER

1020: 2 Speed Polishing Lathe

Polishing Lathe - Two Speed
Two (2) Speeds: 1725 & 3450 RPM, 1/3 HP Motor
 
Standard Dental Taper Shafts with Chuck Removers
 

1015: 2 Speed Polishing Lathe With Quick Chuck

Polishing Lathe Two (2) Speed with Quick Chuck
Two (2) Speeds: 1725 and 3450 RPM
1/3 HP with Quick Chuck
Quick-Change Chuck Mounted on Right Side

1008: 3 in 1 Ortho Electric Welder

Ortho Electric Welder
Three in One:
Electric Welder, Solder, and Annealer

0 Item(s)
US$0.00