PUK Welders and Supplies



1028: PUK D5 Pulse Welder Unit

PUK D5 Micro Pulse Welding System
 
Developed for Daily Use in Orthodontic and Dental Laboratories
 
The PUK Welding System is Delivered with the Following Accessories and Contains All Necessary Documentation and Instructions:
  • The PUK welding system with the selected welding microscope including the welding handpiece
  • 3 different contact clamps,retention welding adapter (set of 1.2, 1.3, 1.5 and 2 mm including 10 retention pins), gas hose, cleaning brush and connecting cable
  • 1 set special electrodes
  • 100-600 USF Argon gas flow regulator by Lampert
  • Footswitch
  • A small welding course with brief instructions, some stainless steel sheets, and welding wire.
  • Manual
  • DVD with videos and information in 5 languages

PUK-410: 0.5 mm Standard Electrodes

Standard Electrodes - 0.5 mm
NO Disk Included
 
Ships in a Ten (10) Pack

PUK-411: 0.6 mm Standard Electrodes

Standard Electrodes - 0.6 mm
NO Disk Included
 

Ships in a Ten (10) Pack

PUK-413: 0.8 mm Standard Electrodes

Standard Electrodes - 0.8 mm
NO Disk Included
 

Ships in a Ten (10) Pack

PUK-855: PUK Electrode Sharpener

PUK Electrode Sharpener
 
Care of the Electrode Tips is Vital to Good Welding Results

The Grinding Motor is a Useful Accessory for Every PUK Welding Device
 

PUK-705: Replacement Diamond Grinding Wheel

PUK Electrode Sharpener Replacement Diamond Grinding Wheel
 
 

PUK-150: Argon Nozzle

Aragon Gas Nozzle
 
Choose From Two (2) Sizes:
0.3mm or 0.4mm
 

PUK-151: Collet for the PUK Hand-piece

Collet for the PUK Handpiece
 
Choose From Two (2) Sizes:
0.5mm/0.6mm Electrodes 
0.8mm Electrodes
 

200-Filler: Stainless Steel Welding/Filler Wire

Stainless Steel Welding/Filler Wire
 
Use for Filling Weld Joints When Laser, Phaser or Mag Welding 
 
Two (2) Sizes:                       
0.012 Filler
0.014 Filler
 

Ships on a 50 ft Spool/Bobbin

 

PUK-301: Titanium Welding/Filler Wire 0.012

Titanium Welding/Filler Wire
 
Welding/Filler Wire for Filling Weld Joints on Titanium When Laser, Phaser or Mag Welding 
 
0.012 Diameter 
 
Ships on a 39 inch Spool/Bobbin

1028: PUK D5 Pulse Welder Unit

PUK D5 Micro Pulse Welding System
 
Developed for Daily Use in Orthodontic and Dental Laboratories
 
The PUK Welding System is Delivered with the Following Accessories and Contains All Necessary Documentation and Instructions:
  • The PUK welding system with the selected welding microscope including the welding handpiece
  • 3 different contact clamps,retention welding adapter (set of 1.2, 1.3, 1.5 and 2 mm including 10 retention pins), gas hose, cleaning brush and connecting cable
  • 1 set special electrodes
  • 100-600 USF Argon gas flow regulator by Lampert
  • Footswitch
  • A small welding course with brief instructions, some stainless steel sheets, and welding wire.
  • Manual
  • DVD with videos and information in 5 languages

0 Item(s)
US$0.00